BraunAbility Toyota Sienna Hybrid

Power In-Floor Wheelchair Accessible Conversion

Dimensions

BraunAbility Toyota Sienna Hybrid Power In-Floor


Door Opening Usable WidthA31"
Door Opening Usable HeightB54"
Interior Height at Center of Van¹C58.5"
Interior Height at Driver/Passenger Position¹D57.5"
Ramp LengthE52"
Ramp WidthF30.3"
Ramp Angle (with Vehicle Kneeled)²G9.5°
Interior Floor Length (Behind Front Seat Strikers)H57"
Overall Interior Floor LegthI89.25"
Interior Width at Slide Doors (Doors Closed)J65"
Interior Width at B PillarsK59"
Ground Clearance at Lowest Point (Unloaded)L5"
Vehicle Height (Not Including Roof Rack)M78"
Driver Clearance (Console to Wall)N28"
Passenger Front Clearance (Console to Wall)O27"


Due to manufacturing tolerances both with the OEM vehicle and the conversion components, all dimensions may vary slightly from those shown. ¹Deduct 2.5" off of interior height for applications with overhead DVD or moon roof ²Ramp angle subject to 1.5 degree variance based on chassis trim level and other environmental factors; measured with a 250 lb approximated wheelchair passenger load at the center of the ramp

Ready for a test drive?

Explore More Options

Find the Best Wheelchair Accessible Toyota Conversion to Meet Your Needs

BraunAbility Power Fold-Out

  • Side-entry conversion
  • Fold-out ramp
  • Power kneeling system
  • Automatic operation
  •  

VMI Northstar

  • Side-entry conversion
  • In-floor ramp
  • Power kneeling system
  • Automatic operation
  •